Home » Alltruth Power A Series (for Asian Markets) » WT5000W PH

WT5000W PH

Category: Alltruth Power A Series (for Asian Markets)

PRODUCT CHARACTERISTICS SAFETY RELIABILITY FUNCTIONS Active PFC and LLC techniques applied.Reliable hardware and voltage& current self-test protection.Advanced charging strategy to ensure safety in the charging process. Integrated die casting technique for…

Phase: Three-phase, three-wire + PE line
Rated AC Input Voltage Range: Phase voltage 200~240VAC; Line-to-line voltage 346-412VAC
AC Input Max Current: 9A 380VAC
Dimensions: 398.5x 281.5x 143mm
Weight: 18kg (39.7lb)
Operating Temperature: -30°C~65°C (-80℉~149℉)
Storage Temperature: -40°C~95°C (-104℉~203℉)
IP Rating: IP65
Efficiency: ≥90%
Noise: ≤55dB

WhatsApp WeChat

Product Details

Sealed Design
Portable/ Onboard
Cycle charging or floating charging for battery pack of lead-acid, lithium, NI-MH, NI-CD in forklift, E-boat, etc

PRODUCT CHARACTERISTICS

SAFETY	RELIABILITY	FUNCTIONS
Active PFC and LLC techniques applied. Reliable hardware and voltage& current self-test protection. Advanced charging strategy to ensure safety in the charging process.	Integrated die casting technique for shell. Inside filled with Organosilicon Encapsulant for heat-conducting, anti-shock, anti-aging. Proven verification in all kinds of tough industrial environments (Wet, Hot, High vibration, Dust).	CAN BUS. Auxiliary Power. Vehicle Charging Interlock System. Bluetooth. LED Display Panel. External Indicator.

Protection Features

Burnout Protection

When the internal temperature of the charger exceeds the internal setting value, the charging current is automatically reduced; when the ambient temperature exceeds 65°C, the charger will automatically shut down for protection, and when the temperature is restored, charging will be automatically resumed.

Protection for Reverse Connection of Batteries

When the battery is connected in reverse, the internal circuit of the charger will disconnect itself from the battery, and the charger will not be damaged.

No-load Protection

No output when no battery is connected.

Short Circuit Protection

When the output short circuit occurs, the internal circuit of the charger and the battery are disconnected, and the charging can only be resumed after the fault is eliminated and the battery is reconnected